Back To Main
Transfer between PC and 1541.
Hardware: The XE1541-cable
Should only be built if you are used to soldering and you know what you are doing. The C64GG cant be held
responsible to any damage or software losses!
25 Pin D-Sub Male for the PC printerport.
6 Pin Din Male for the 1541.
4 Schottky-diodes (e.g. 1N5819, BAT46, BAT85)
Read more about the cable at This page.
Software:
Star Commander A Norton Commander like file transfer utility
The older X1541 cable doesn't work with most Pentium TX and all Pentium-II and Pentium-III computers.
The XE1541 extended cable is © by Nicolas Welte and Wolfgang Moser, 1997.
Transfer between Amiga and 1541.
Hardware:
Should only be built if you are used to soldering and you know what you are doing. The C64GG cant be held
responsible to any damage or software losses!
25 Pin D-Sub Male for the Amiga printerport.
6 Pin Din Male for the 1541.
AMIGA
PIN | 1541
PIN | Description |
| 5 | 3 | ATN |
| 6+8 | 4 | CLK |
| 7+9 | 5 | DATA |
| 16 | 6 | RESET |
| 20 | 2 | GND |
Software:
Easy1541 v1.3.
Transfer between Amiga and 1541.
Hardware:
Should only be built if you are used to soldering and you know what you are doing. The C64GG cant be held
responsible to any damage or software losses!
25 Pin D-Sub Male for the Amiga printerport.
6 Pin Din Male for the 1541.
2 Diods 1N4148
AMIGA
PIN |
| 1541
PIN | Description |
| 5 | ----- | 3 | ATN |
| 6 | -|<|- | 4 | CLK |
| 8 | ----- | 4 | CLK |
| 7 | -|<|- | 5 | DATA |
| 9 | ----- | 5 | DATA |
| 22 | ----- | 2 | GND |
Software:
Iec.
Transfer between Amiga and C64.
Hardware:
Should only be built if you are used to soldering and you know what you are doing. The C64GG cant be held
responsible to any damage or software losses!
25 Pin D-Sub Male for the Amiga printerport.
6 Pin Din Male for the 1541.
1 IC 7406
3 Resistors 1Kohm
Our own designed interface.
Software:
Emul1541 v1.1.
Alot of other useful tools at Fairlight tools.